Description
You Finally Found The Part!
It can be tough to find the exact burr grinder parts that you need. This is especially true when your brand doesn't even sell a replacement.
If your coffee maker is jamming or clogging, you might have a worn down impeller. Install a new one so you can get back to your delicious,
home-brewed coffee. The Impresa impeller fits Breville Burr Grinder BCG800XL and more!
How To Install
What Tools Will I Need?
-#2 Phillips screwdriver with a 8 inch shaft (or longer)
-10mm socket with ratchet or a 10mm wrench
1. Remove hopper, upper burrs, and lower burrs
2. Remove the base
3. Remove the 4 screws that hold the top on
4. Remove the front display
5. Remove the gear holder
6. Remove old impeller
7. Clean the exit chute and rinse the new impeller
8. Install your new impeller
9. Check fit
10. Reassemble your machine
11. Enjoy a fresh cup of coffee!
Pro Tip: Tight fit after installation? Sand down as needed
Grab your new impeller today!
Note: This is an aftermarket product manufactured by Impresa Products. Any other brands mentioned are for illustrative purposes only and
are in no way affiliated with Impresa Products, nor do they endorse Impresa Products.
Reviews
There are no reviews yet.